The post Track-iT Tag appeared first on AC Americas.

The post Track-iT WP Anchor appeared first on AC Americas.

Connect the application to your Leica S910 DISTO laser measure device, and have the ability to retrieve the exact 3D location with regards to your origin point of any object right to your phone. Create measurement groups through the app, or receive fixture and calibration point names by synchronizing with Follow-Me.

Once you have measured all points and fixtures you wish to measure, simply connect your iPhone to the same network Follow-Me is on, after which you can synchronize all performed measurements straight into Follow-Me. The app will save you a lot of time in retrieving the dimensions of the performance area you are at. This will make the process of installing and calibrating your Follow-Me system even quicker and easier.

The post iOS Follow-Me Assistant Application appeared first on AC Americas.

The post Follow-Me Track-iT Server appeared first on AC Americas.

The Follow-Me TWO license allows you to track up to 2 performers using a maximum of 12 fixtures from any manufacturer. This license is to used on the Follow-Me Rack Server in order to start performer tracking. Together with the Follow-Me hardware, this license is perfect for following up to 2 performers.

Follow-Me is able to integrate with external consoles over Art-Net or sACN and can also be used standalone. The Follow-Me package has proven to be enormously reliable as remote follow spot control and performer tracking for a large number of shows.

The post Follow-Me TWO appeared first on AC Americas.

Alongside the macOS platform the FM Rack Server is ready equipped with all connectors to insure smooth integration with the other hardware components of your Follow-Me System, incl. HDMI and SDI to receive the live camera feed into Follow-Me and Ethercon to integrate Follow-Me in your lighting infrastructure.

The 19” enclosure is 1U high and 8.25-inch deep, making it perfect for use in a wide range of popular racks and rackcases. A convenient front panel power button turns the system on and off. Two USB 3.0 ports on the front of the rack server enables connection of a keyboard and mouse. The rack server directs cool air in a one-way path through front panel openings to the computers’ air intakes, and then out the back, to keep the system operating reliably.

The front panel power button enables operation of the computer’s rear-mounted power switch, while a USB 3.0 ports enables connection of a USB device to the computer. Connect the rack server to a monitor and a PoE switch and you’re good to run Follow-Me 3D!

The post Follow-Me Rack Server appeared first on AC Americas.

The Follow-Me SIX system license allows you to track up to six performers using an unlimited amount of fixtures from any manufacturer. This license is optimised for use within the Follow-Me SIX System’s FM Rack Server in order to start performer tracking. Together with the other Follow-Me system hardware items, this license is perfect for following up to six performers.

Follow-Me is able to integrate with external lighting consoles over Art-Net and sACN, or to be used standalone. The Follow-Me package has proven to be enormously reliable as remote follow spot control and performer tracking for a large number of shows.

The post Follow-Me SIX appeared first on AC Americas.

It has two buttons and two encoders that can be assigned to any mapping function within the Follow-Me software. The console has a target selection ID display to identify which target the controller is connected to.

The casing of the Follow-Me mouse console is made from robust metal: specially made durable for those rock and roll shows. The mouse feels nice to control so that operators are not strained during prolonged shows. Together with the fader console, it is a perfect combination for operating the Follow-Me software.

The post Follow-Me Mouse Console appeared first on AC Americas.

The back of the camera box can fit two cables, one power con in, as well as a XLR-5 specifically for remote camera menu control in the Follow-Me software. The XLR-5 cable goes straight into the Follow-Me Rack Server as to enable camera control. This, for example, allows the system technician to enable infrared on the fly. The camera box comes in a set including the Marshall CV506 camera and 3 lens options.

The post Follow-Me Camera Set appeared first on AC Americas.

The console has a Neutrik XLR-4 output to link to the mouse console. An XLR cable is included with the fader console. There is also a Neutrik XLR-3 available for an optional LED desk light. The Follow-Me Fader Console supports the industry-standard Littlite X-LED Series and Littlite XR-LED Series

The post Follow-Me Fader Console appeared first on AC Americas.