Avenger Clamps, Adapters & Accessories - AC Americas

STAND ADAPTER Junior Female 1 1/8in to Baby Male 5/8in

whiteboard — Thu, 08 May 2025 14:58:12 +0000

The Avenger E200 STAND ADAPTER (Converts a Junior Female 1 1/8in/28mm Receiver to a 5/8in/16mm Baby Male Spigot/Stud). This versatile adapter is ideal for use on any light stand, clamp, or rolling base that has a Junior Female Receiver. The small hole on the bottom of the adapter allows for safety pins to be engaged when needed for additional safety.

Works Well With:

Combo Stands (A1020B, A1020CS, A4050CS, A5036CS, B6030CS, B6039CS, B6029X, B6040X, B6040XK),

Roller Bases (297BBASE, 299BBASE),

C-Stands (A2030D, A2030DCB, A2030DKIT, A2030DCBKIT)

The post STAND ADAPTER Junior Female 1 1/8in to Baby Male 5/8in appeared first on AC Americas.

MP Eye Coupler w/16mm Spigot

whiteboard — Thu, 08 May 2025 14:56:52 +0000

Avenger’s MP Eye Coupler is a classic clamp, used on fixings or tubes. Made of aluminum alloy, it can be tightened without a key and has a 16mm hole for mounting lights or other accessories. It can withstand a maximum load of 500 kg and works with tubes with a diameter between 42 and 52 mm.

The post MP Eye Coupler w/16mm Spigot appeared first on AC Americas.

MP Eye Coupler

whiteboard — Thu, 08 May 2025 14:56:48 +0000

Avenger MP Eye coupler is used on tubes and metal trellis structures. Made from aluminum alloy, this collar tightens with a wing nut and is equipped with a 12.5mm female connector for attaching lights and other accessories. It supports a load of up to 500 kg and is fixed on tubes with a diameter of 42 to 52 mm.

The post MP Eye Coupler appeared first on AC Americas.

LP Eye Coupler w/28mm Spigot

whiteboard — Thu, 08 May 2025 14:56:40 +0000

Avenger’s LP Eye Coupler w/28mm Spigot is used on tubes and metal lattice structures. Made from aluminum alloy, this collar tightens with a wing nut and is equipped with an 11/8 ” spigot, ideal for lighting TV shoots. It supports a load of up to 500 kg and is fixed on tubes with a diameter of 48 to 52 mm.

The post LP Eye Coupler w/28mm Spigot appeared first on AC Americas.

Avenger TVMP Adapter (Yoke to Stand)

whiteboard — Thu, 08 May 2025 14:56:07 +0000

The Avenger E390 TVMP ADAPTER (YOKE to STAND) is ideal for most TV lighting, LED lights, or any lights that have a hole in the yoke for the mounting of a C-Clamp or similar. If these lights need to be mounted on a baby stand or junior stand, this adapter can do both. The adapter has a 5/8in the female receiver while the outside diameter of the adapter is 1 1/8in. The TVMP adapter is equipped with a threaded bolt on top that allows for quick attaching to a yoke. A set screw is located below the T-knob and can be used for increased securing and safety. Use with Lights with YOKE Mounts: Litepanels Gemini, LED Lights with Yokes, Panel Lights with Yokes.

The post Avenger TVMP Adapter (Yoke to Stand) appeared first on AC Americas.

Avenger Swiveling C-Clamp

whiteboard — Thu, 08 May 2025 14:55:59 +0000

The C150 Swivelling “C” Clamp is an extremely robust Gravity Cast clamp that is designed to clamp onto truss, pipe grids, or round tubes. It is rated to hold from 10-75kg/22lbs-165.3lbs. (Up to 10kg/22lbs on the 16mm/ 5/8inch retractable spigot and up to 75kg/165.3lbs on the Junior 28mm/1 1/8inch receiver.) The clamping range on this clamp is 28-78mm/1.1-3.1inches. The added swiveling feature allows for easy aiming of any light. The clamp includes a safety cable for the junior pin and an additional thumb screw to securely lock the pin when needed.

Recommended Accessories: C155, E200, E390,

The post Avenger Swiveling C-Clamp appeared first on AC Americas.

Avenger Scissor Clip with Cable Support

whiteboard — Thu, 08 May 2025 14:55:48 +0000

The Avenger C1005 Drop Ceiling Scissor Clip with Cable Support is designed for installations where you need to run cable, power supply, and another wiring from a drop ceiling. Whether it be for temporary or semi-permanent installations the C1005 is a great addition to work with C1000 when positioning panels, LEDs, or small HMI’s.

Recommended Accessories: C1000, C155

The post Avenger Scissor Clip with Cable Support appeared first on AC Americas.

Avenger Safety Cable 100cm

whiteboard — Thu, 08 May 2025 14:55:43 +0000

This 100cm (39 in) safety cable is 4mm thick (0.1 in) in diameter and is a solid piece of equipment to secure lights suspended overhead.

The post Avenger Safety Cable 100cm appeared first on AC Americas.

Avenger Rubber Filled Wheel Set For Strato Safe

whiteboard — Thu, 08 May 2025 14:55:43 +0000

Avenger Rubber Filled Wheel Set For Strato Safe. Set of 3 Rubber Filled for strato safe stands. Supplied with double brake mechanism that can lock wheels and pivot separately. Pivoting mechanism has 12 locking positions

The post Avenger Rubber Filled Wheel Set For Strato Safe appeared first on AC Americas.

Avenger Pelican Gaffer Grip

whiteboard — Thu, 08 May 2025 14:55:21 +0000

This pelican gaffer grip works on diameters from 15mm to 80mm and can support a payload up to 10kg. Made from aluminium, this grip gets its name from its profile along with the fact it can open wider than most clamps. It can also hold a big payload. It features two attachments, 16mm and 17mm.

The post Avenger Pelican Gaffer Grip appeared first on AC Americas.