Main Features: 

• 115W RGB + Warm White LED source
• CRI >94; R9 >88,8; TLCI >92
• 2 section pixel control and built-in lighting effects for cinema applications, colour gel matching
• Silent operation with multiple fan modes
• Wireless DMX (CRMX+W-DMX), Ethernet connectivity, low voltage inputs (24-36V, 48Vdc)

LIGHT SOURCE

• Source: 115W RGB + Warm White LED
• Luminous flux: 7’642 @3.200 K with LD filter
• Lux: 220lx @5 m full
• CRI: 93 @3.200 K; 94 @5.600 K
• R9: 90 @3.200 K; 92 @5.600 K
• TLCI: 91 @5.600 K
• TM30 Rf: 91 @3.200 K; 90 @5.600 K
• TM30 Rg: 105 @3.200 K; 104 @5.600 K
• Source life expectancy: > 50.000 h

OPTICS

• Beam angle: 98°
• Field angle: 153°
• Lens type: medium density diffusion panel (interchangeable)
• Additional optics: see available accessories

COLOUR SYSTEM

• Colour control: XY, CCT, RGBW, Gel, HSI, Source Emulation, colour macros, CTO on colours
• Colour mixing: RGB + Warm White
• CCT: CCT control range from 2.200K to 15.000K, + / – green correction, tungsten emulation
• White presets: 2.800 K – 10.000K with 28 K resolution
• Colour wheel: virtual colour wheel with macros
• Macros: Gels library on-board

DYNAMIC EFFECTS

• Control Resolution: 16-bit dimmer, colours
• Pixel patterns: pre-programmed pixel macros and cinema lighting effects patterns
• Special features: linear crossfade channel from any white to any colour; virtual CTO on colours

BODY

• Body: sturdy die-cast aluminium body
• Body colour: black

CONTROL

• Protocols: DMX512, RDM, Art-Net, sACN, W-DMX
• Stand Alone: selectable mode through 3 rotatory knobs
• Pixel control: 2 linear section control
• Wireless Control: integrated, CRMX + WDMX TRX
• RDM: RDM for remote monitoring and settings
• Display: Graphic User Interface
• Firmware upgrade: yes, via USB – DMX interface (UPBOXPRO/UPBOX1) not included

ELECTRONICS

• Dimmer: linear 0 ~ 100% electronic dimmer
• Dimmer curves: 4 selectable dimming modes available
• Strobe / shutter: 1 – 30 Hz, electronic
• Operating temperature: -10° ~ +45°
• LED Control: flicker free frequency with adjustable PWM
• Selectable PWM: 600 ~ 40.000 Hz

ELECTRICAL

• Mains power supply: 100-240V – 50/60Hz
• Low Voltage DC mains: 48Vdc and 24-36V
• Max power consumption: 130W
• Output (at 230V): 19 units on a single power line
• Power factor: >0,93
• Inrush current: 110VAC/8.1A, 230VAC/23.8A

PHYSICAL

• IP rating: 20
• Cooling: active, silent operation
• Suspension and fixing: bracket for hanging and positioning
• Signal connection: Amphenol XLR 5p IN/OUT connectors
• Power connection: Neutrik powerCON TRUE1 IN/OUT connectors
• Low Voltage DC connector: XLR 4p
• Dimensions (WxHxD): 529x276x144mm / 20.83”x10.87”x5.67”
• Dimensions with PO system (WxHxD): 547x396x144mm / 21.54”x15.59”x5.67”
• Weight: 6kg / 13.23lbs
• Weight with PO system: 8,6kg / 18.96lbs

CERTIFICATIONS / APPROVALS

• Certifications / Approvals: CE, UKCA, RCM, cTUVus, FCC

BOX CONTENT

• 1 x ECLPANELTWCM2X1
• 1 x 1,5 meters power cable (BARE END – NEUTRIK POWERCON TRUE1 IP65)
• 1 x ECLFRSPG
• User Manual

To learn more about Photometrics, Software & Certificates, click here.

Disclaimer: PROLIGHTS reserves the right to make changes and improvements to any of the products described on this website without prior notice. Specifications are subject to change without notice. Please refer to the manufacturer’s web page for the most up-to-date specifications and product details. prolights.it.

For additional downloads and support, visit: prolights.it/support