Main features:

• 150W calibrated RGB+WarmWhite source, with high CRI and TM30
• Asymmetric beam angle of 100° (horizontal) x 60° (vertical)
• Xlr5p in/through for DMX/RDM control and communication, optional W-DMX + CRMX, Stand-Alone mode through two rotatory knobs

LIGHT SOURCE

• Source: 150W RGB + Warm White LED
• Luminous flux: 5’342 @full
• Lux: 65lx @5 m full
• CRI: preliminary 92,8 @5’600K
• R9: preliminary 94,7 @5’600K
• TLCI: preliminary 92 @5’600K
• TM30 Rf: preliminary 91,3 @5’600K
• TM30 Rg: preliminary 106 @5’600K
• Source life expectancy: > 20.000 h

OPTICS

• Optics: asymmetrical beam reflector in pure aluminium 99,6%
• Beam angle: (H) 100° x (V) 60°
• Additional optics: 5° smooth filter on-board

COLOUR SYSTEM

• Colour mixing: RGB + Warm White
• CCT: CCT control, + / – green correction, tungsten emulation
• White presets: 2.800 K – 10.000K
• Colour wheel: built-in white presets

DYNAMIC EFFECTS

• Control Resolution: 16-bit dimmer
• Static mode: selection of static dimmer, colors and color temperature
• Manual mode: manual adjustment of intensity, CT, colour correction from knob
• Auto mode: built-in programs with execution speed adjustment

BODY

• Body: sturdy die-cast magnesium body
• Body colour: RAL 9004
• Other: see available accessories

CONTROL

• Protocols: DMX512, RDM, CRMX
• Stand Alone: 2 rotatory knobs
• DMX channels: 1/2/5/9/10/12/18channel
• Wireless Control: optional, LumenRadio Timo Fx DMX/RDM compatible with both CRMX (Lumen Radio) and W-DMX (Wireless DMX)
• RDM: RDM for remote monitoring and settings
• Display: Graphic User Interface
• Firmware upgrade: yes, via USB – DMX interface (UPBOXPRO/UPBOX1) not included
• Master/Slave: for synchronised operation of more units linked in a chain

ELECTRONICS

• Dimmer: linear 0 ~ 100% electronic dimmer
• Dimmer curves: 4 selectable dimming modes available
• Strobe / shutter: 1 – 30 Hz, electronic
• Operating temperature: -10° ~ +45°
• Selectable PWM: 600 ~ 40.000 Hz

ELECTRICAL

• Mains power supply: 100-240V – 50/60Hz
• Max power consumption: 175W
• Output (at 230V): 7 units on a single power line
• Power factor: > 0,94

PHYSICAL

• IP rating: 20
• Cooling: active, silent operation
• Suspension and fixing: bracket for hanging and positioning
• Signal connection: Amphenol XLR 5p IN/OUT connectors
• Power connection: Seetronic powerCON TRUE IP65 IN/OUT
• Dimensions (WxHxD): 283x273x176mm / 11.14”x10.75”x6.93”
• Weight: 3,2kg / 7.05lbs

CERTIFICATIONS / APPROVALS

• Certifications / Approvals: CE, UKCA, RCM, cTUVus, FCC

BOX CONTENT

• 1 x ECLEXPOFL150FC
• 1 x 1,5 meters power cable (BARE END – SEETRONIC POWERCON TRUE1 IP65)
• 1 x User Manual

To learn more about Photometrics, Software & Certificates, click here.

Disclaimer: PROLIGHTS reserves the right to make changes and improvements to any of the products described on this website without prior notice. Specifications are subject to change without notice. Please refer to the manufacturer’s web page for the most up-to-date specifications and product details. prolights.it.

For additional downloads and support, visit: prolights.it/support