Product
EclCyclorama 050
Best Seller
Product
EclCyclorama 050
170W linear soft CYC and flood light with RGB+Warm White colour mixing
EclCyclorama 050 is a soft-edge, linear cyclorama and floodlight, designed in a surprisingly low profile form factor to meet applications at both front and end of the stage, offering an unprecedent level of brightness in its category. The fixture is equipped with a custom and calibrated RGB + Warm White LED source, which is capable to deliver a linear and high quality white reproduction of the entire spectrum with high CRI, TLCI and TM30 performances. The Optical system has been designed to offer a very wide asymetric beam angle, and capable of a superior lumen efficiency, making the EclCyclorama range a very flexible solution, suitable for both application where fixture are connected each other or separated by a considerable distance, without worrying of dark-edge or uniformity gaps. The fixture is extremely user friendly and offers a multitude of control possibilities being DMX, RDM, Artnet, sACN and Wireless DMX.
Accessories
LumenRadio
CRMX Luna
Luna is the essential flex unit that gets the job done, being able to transmit or receive one universe of DMX.
PROLIGHTS
Light diffusion filter for ECLCYC series projectors
Light diffusion filter for ECLCYC series projectors.
PROLIGHTS
Orientable hanging bar for ECLCYC series projector
Orientable hanging bar for ECLCYC series projectors.
PROLIGHTS
Quick-Lock Omega Bracket (OS25)
Quick-lock omega bracket with M10 hole, compatible with RA2000PROFILEHB and ECLCYC100.
PROLIGHTS
Upper and lower barndoors with directional flap to adjust the light beam
Upper and lower barn doors with a directional flap to adjust the light beam for ECLCYC series projectors.
EclCyclorama 050
Product Information
Main Features:
- RGB + Warm White colour systems allow high-quality whites (CRI 93 @3.200 K) and bright colours.
- Slim design, with only 12 cm height for easy implementation in the front or at the back of the stage.
- Wide Asymmetric beam angle to allow flexible installation at modular distances between fixtures
- Hardware designed with tilt angle adjustment, beam control and flexible hanging and ground stacking applications.
LIGHT SOURCE
- Source: 170W RGB + Warm White
- Luminous flux: (with 40°x80° filter on board) 13’896 @Full
- Lux: @1 m to wall and 1,5 m height @ full (with standard filter) 625 lx – (with 40° filter) 1’530 lx – (with 10°x60° filter) 1’590 lx – (with 30°x60° filter) 1’690lx
- CRI: 93 @3.200 K; 91 @5.600 K
- R9: 91 @3.200 K; 95 @5.600 K
- TLCI: 87 @5.600 K
- TM30 Rf: 88,8 @5.600 K
- TM30 Rg: 107,4 @5.600 K
- Source life expectancy: > 50.000 h
OPTICS
- Beam angle: (VxH) 40°x80°
- Additional optics: see available accessories
COLOUR SYSTEM
- Colour mixing: RGB + Warm White
- CCT: CCT control, + / – green correction, tungsten emulation
- White presets: 2.800 K – 10.000K
- Colour wheel: virtual colour wheel with macros
DYNAMIC EFFECTS
- Control Resolution: 16-bit dimmer, colours
- Special features: linear crossfade channel from any white to any colour; virtual CTO on colours
BODY
- Hardware on-board: sockets for quick-Lock Omega bracket (clamp not included)
- Body: sturdy die-cast aluminium body
- Body colour: black
- Other: +/- 8° angle adjusting
CONTROL
- Protocols: DMX512, RDM, Art-Net, sACN, W-DMX
- Wireless Control: included, wireless solution receiver
- RDM: RDM for remote monitoring and settings
- Display: Graphic User Interface
- Firmware upgrade: via DMX with UPBOXPRO/UPBOX1 (USB-DMX interface not included)
ELECTRONICS
- Dimmer curves: selectable dimming modes available
- Strobe / shutter: 1-30 Hz, electronic
- Operating temperature: -10° ~ +45° Ta
- LED Control: flicker free frequency with adjustable PWM
- Selectable PWM: 600 ~ 25.000 Hz
ELECTRICAL
- Mains power supply: 100-240V – 50/60Hz
- Max power consumption: 180W
- Standby power: 110V (60Hz): 6W; 230V (50Hz): 6,4W
- Power factor: >0,94
PHYSICAL
- IP rating: IP20
- Cooling: heat sink without fan
- Suspension and fixing: any position with quick-lock omega brackets
- Signal connection: Amphenol XLR 5p IN/OUT connectors
- Data connection: RJ45 IN/OUT
- Power connection: Seetronic powerCON waterproof IN/OUT connectors
- Dimensions (WxHxD): 500x119x148mm / 19.69”x4.69”x5.83”
- Weight: 5kg / 11.02lbs
CERTIFICATIONS / APPROVALS
- Certifications / Approvals: CE, UKCA, RCM, cTUVus, FCC
BOX CONTENT
- 1 x ECLCYC050
- 1 x OS25
- 1 x 1,5 meters 3G1,5mmq power cable (BARE END – SEETRONIC POWERCON TRUE1 IP65 power connector)
- User Manual
To learn more about Photometrics, Software & Certificates, click here.
Disclaimer: PROLIGHTS reserves the right to make changes and improvements to any of the products described on this website without prior notice. Specifications are subject to change without notice. Please refer to the manufacturer’s web page for the most up-to-date specifications and product details. prolights.it.
For additional downloads and support, visit: prolights.it/support
You May Also Like
EclCyclorama 100
330W linear soft CYC and flood light with RGB+Warm White color mixing EclCyclorama 100 is a soft-edge, linear cyclorama, and…