Avenger & Manfrotto - AC Americas

Variable Friction Arm

whiteboard — Thu, 08 May 2025 14:58:20 +0000

The Manfrotto 244N Variable Friction Arm is one of the most popular arms made by Manfrotto! Often called a Magic Arm the 244N is used for lights, camera, and audio applications and is the industry standard for most remote rigging applications. The 244N Variable Friction Arm uses a central friction locking handle to lock all 3 points of the arm in place. The length of the arm is 53 cm/20.87 inches and is capable of holding loads up to 3 kg/6.6 lb. Typically the 244 arm is mounted on a Super Clamp but you can also mount it to light stands and other accessories such as wall plates by using the baby 16 mm/ 5/8 inch pin on either end of the arm. The baby pins on each end of the arms also have a 9.53 mm/ 3/8 inch thread receiver or a 6.35 mm/ 1/4 inch threaded receiver. The remote mounting possibilities of this versatile tool are endless!

Recommended Accessories: 035, 125, 147, C155, FF3276, C1575B, 014-14, 014-38, 003,

The post Variable Friction Arm appeared first on AC Americas.

Super Clamp with Short Stud

whiteboard — Thu, 08 May 2025 14:58:16 +0000

The Manfrotto 035 Super Clamp is truly one of the best inventions from Manfrotto! This iconic piece was originally made back in the early ’70s and is still most likely one of the most widely used pieces of lighting and grip gear today. Manfrotto 2909 Super Clamp has been certified TÜV and this certification is recognized as an important certification in numerous parts of the world. Capable of supporting loads up to 15 kg/33 lb. There are numerous Super Clamp adapters that are hex-shaped or round on one end and connect easily to the Hex socket of the 035 and allow for various types of connections to lights and other tools on the other end. Most of these connectors are 16 mm/ 5/8 inch to 16 mm/ 5/8 inch (Baby to Baby connectors). There is also a 1/4in UNC threaded receiver on the bottom of the clamp. The Super Clamp jaws can grasp diameters ranging from 13 mm/0.51 inches to 55 mm/ 2.16 inches. For added versatility, a 035WDG comes with the 035 Super Clamp allowing easy connection to flat services if needed. Finally, the Super Clamp works well with magic arms, friction arms, articulated arms, micro arms, DADO Arms, and many other accessories. Whether it be for lighting, Audio, or rigging Super Clamps are everywhere. Note: 2909 is exactly the same as 035 but includes a 2907 (037) Stud.
Recommended Accessories: 061, 061 RA, 066, 264, E600, 244, 143, MSY0590A, 032, 032B, C155, FF3276.

The post Super Clamp with Short Stud appeared first on AC Americas.

Telescopic Post, Extends from 33.5”-80”

whiteboard — Thu, 08 May 2025 14:58:16 +0000

The Manfrotto FF3248 Telescopic post is ideal to suspend lights from carriages in the Sky Track system. A telescopic system for the balanced suspension of loads. Adjustable for setting the height of your lights with automatic positioning at the desired position, the FF3348 adjusts from 85 to 203 cm/33.5 to 80 inches. A 16 mm/5/8 in female attachment with safety plug and thumb screw locking knob is fitted at each end. The safety plug has a push-button release that allows for rotating your lights into position and is a double safety feature to secure the telescopic post to the carriage or to the light. To attach a light with a 16 mm/5/8 in the receiver, a 013 spigot is required. To adjust the balance of the load, rotate the center handle clockwise or counterclockwise to apply the appropriate tension. This will allow for easy up and down of the telescopic post. It sustains loads from 1.5 kg/3.3 lb up to 12 kg/26.4 lb max.

Recommended Accessories: 013, FF3276, FF3228, FF3043, FF3856, FF3229, FF3230, FF6003B, FF6004B, Ff6005B, F301, F800, F805

The post Telescopic Post, Extends from 33.5”-80” appeared first on AC Americas.

STAND ADAPTER Junior Female 1 1/8in to Baby Male 5/8in

whiteboard — Thu, 08 May 2025 14:58:12 +0000

The Avenger E200 STAND ADAPTER (Converts a Junior Female 1 1/8in/28mm Receiver to a 5/8in/16mm Baby Male Spigot/Stud). This versatile adapter is ideal for use on any light stand, clamp, or rolling base that has a Junior Female Receiver. The small hole on the bottom of the adapter allows for safety pins to be engaged when needed for additional safety.

Works Well With:

Combo Stands (A1020B, A1020CS, A4050CS, A5036CS, B6030CS, B6039CS, B6029X, B6040X, B6040XK),

Roller Bases (297BBASE, 299BBASE),

C-Stands (A2030D, A2030DCB, A2030DKIT, A2030DCBKIT)

The post STAND ADAPTER Junior Female 1 1/8in to Baby Male 5/8in appeared first on AC Americas.

Super Clamp w/ Stud

whiteboard — Thu, 08 May 2025 14:58:12 +0000

The Manfrotto 035RL Super Clamp is truly one of the best inventions from Manfrotto! This iconic piece was originally made back in the early ’70s and is still most likely one of the most widely used pieces of lighting and grip gear today. Manfrotto 035 Super Clamp has been certified TÜV and this certification is recognized as an important certification in numerous parts of the world. Capable of supporting loads up to 15 kg/33 lb. There are numerous Super Clamp adapters that are hex-shaped or round on one end and connect easily to the Hex socket of the 035 and allow for various types of connections to lights and other tools on the other end. Most of these connectors are 16 mm/ 5/8 inch to 16 mm/ 5/8 inch (Baby to Baby connectors). There is also a 1/4in UNC threaded receiver on the bottom of the clamp. The Super Clamp jaws can grasp diameters ranging from 13 mm/0.51 inches to 55 mm/ 2.16 inches. For added versatility, a 035WDG comes with the 035 Super Clamp allowing easy connection to flat services if needed. This version of the 035 includes the 2900 Stud (036-14). Finally, the Super Clamp works well with magic arms, friction arms, articulated arms, micro arms, DADO Arms, and many other accessories. Recommended Accessories: 061, 061 RA, 066, 264, E600, 244, 143, MSY0590A, 032, 032B, C155, FF3276

The post Super Clamp w/ Stud appeared first on AC Americas.

Reversible Short Stud

whiteboard — Thu, 08 May 2025 14:58:07 +0000

The Manfrotto 037 Reversible Short Stud in brass is a 16 mm/ 5/8 inch reversible short stud with a 6.5 mm/ 1/4 in male thread on one end and a 9.53 mm/ 3/8 in male thread on the other end. This stud can be fitted into the Super Clamp 035 socket, enabling you to mount a camera directly or attach it to a camera head, gimbal, or other mounts and lighting accessories. By keeping the super clamp flush to the mount of your choice, you’ll always know it’s the right stud for your equipment.

Recommended Accessories: 035, C155, FF3276, 133B, 013, 237HD, 237

The post Reversible Short Stud appeared first on AC Americas.

Single Deluxe Autopole Two, Extends from 82.7”-145.7”(S.O.)

whiteboard — Thu, 08 May 2025 14:58:07 +0000

The Manfrotto Deluxe Autopole 2 is one of the most clever devices invented by Manfrotto. Compact, strong and perfect for small spaces the Autopole® extends from any floor to ceiling and uses rubber pads so that it will not mark any surfaces and provides extra grip and helps to prevent slipping when in position. The 432-3,7 extends from 210 to 370 cm/ 82.7 to 145.7 inches and uses a cantilever-style locking system to safely set up and secure in place. This deluxe model uses an advanced handle design that slides up and down to engage and disengage the cantilever. Made from aluminum the Autopole® can be used to support lights, backgrounds, and depending on what accessories you couple with it make supports for across sets and even make shelving.

Recommended Accessories: 035, 038, 032SPL, 032PC, 032BBASE, 042, 039, 041,

The post Single Deluxe Autopole Two, Extends from 82.7”-145.7”(S.O.) appeared first on AC Americas.

Photo Variable Friction Arm with Interchangeable Attachments

whiteboard — Thu, 08 May 2025 14:58:01 +0000

The Manfrotto 244Micro Friction Arm is an amazing variable arm for video, photo, and cine applications. Designed to hold monitors, microphones and other accessories this arm only weighs 0.22 kg/ 0.5 lb. Optimized to support loads up to 3 kg/6.6 lb the interchangeable 1/4 inch and 3/8 inch adapters mount to just about anything with the appropriate receiver. Mount it to cheese plates, cheese balls (DADO), and clamps giving you unlimited flexibility to position monitors, microphones, and even small cameras smartphones. With a number of accessories, it is easy to customize this arm for your exact needs. Constructed from lightweight aluminum the central ratcheted locking mechanism easily allows positioning where needed. This arm is part of the famous Manfrotto 244 Variable Friction Arm family and always performs in the most demanding environments.

Recommended Accessories: 386B-1, MSY0590A, 244ADPT58, 244ADPT38AR, 244ADPT38AA, 244ADPT3814, MC1990A, 035

The post Photo Variable Friction Arm with Interchangeable Attachments appeared first on AC Americas.

Rapid Adapter

whiteboard — Thu, 08 May 2025 14:58:01 +0000

014-14:

The Manfrotto 014-14 Rapid Adapter is a multi-purpose, versatile, and built to last 16 mm/ 5/8 inch baby female light stand adapter with a 6.35 mm/ 1/4 in the threaded end. Whether you are in cine, video, photo, or do any type of content creation this rapid adapter is an indispensable addition to any kit! The Rapid Adapter allows for vertical or horizontal mounting of lighting and accessories that have a 1/4″- 20 threaded receiver. Mount lights, LEDs, strobes, and cameras to any light stand.

014-38:

The Manfrotto 014-38 Rapid Adapter is a multi-purpose, versatile, and built to last 16 mm/ 5/8 inch baby female light stand adapter with a 9.53 mm/ 3/8 in the threaded end. Whether you are in cine, video, photo, or do any type of content creation this rapid adapter is an indispensable addition to any kit! The Rapid Adapter allows for vertical or horizontal mounting of lighting and accessories that have a 3/8″- 16 threaded receiver. Mount lights, LEDs, strobes, and cameras to any light stand.

Recommended Accessories: 014-38, FF3276, 035, 013, 036-14

The post Rapid Adapter appeared first on AC Americas.

Photo variable Friction Arm With Bracket

whiteboard — Thu, 08 May 2025 14:57:55 +0000

The Manfrotto 244 Variable Friction Arm is one of the most popular arms made by Manfrotto! Often called a Magic Arm the 244 is used for lights, camera, and audio applications and is the industry standard for most remote rigging applications. The 244 Variable Friction Arm uses a central friction locking handle to lock all 3 points of the arm in place. The length of the arm is 53 cm/20.87 inches and is capable of holding loads up to 3 kg/6.6 lb. The included 143BKT called a camera umbrella bracket is used for cameras, transmitters, lighting tools like umbrellas, and other small panel lights, strobes, and accessories. Typically the 244 arm is mounted on a Super Clamp but you can also mount it to light stands and other accessories such as wall plates by using the baby 16 mm/ 5/8 inch pin on either end of the arm. The baby pins on each end of the arms also have a 9.53 mm/ 3/8 inch thread receiver or a 6.35 mm/ 1/4 inch threaded receiver. The remote mounting possibilities of this versatile tool are endless!

Recommended Accessories: 035, 125, 147, C155, FF3276, C1575B, 014-14, 014-38, 003

The post Photo variable Friction Arm With Bracket appeared first on AC Americas.